Sony STR-DN1040 User Manual
Page 80
80
US
You can connect to a Bluetooth device
from this receiver.
Check the following before playing music:
– The Bluetooth function of the Bluetooth
device is turned on.
– The pairing has been completed
1
Select “Connect/Disconnect” in
step 4 in “Pairing the receiver with
a Bluetooth device” (page 78).
The receiver automatically connects to
the last connected Bluetooth device.
2
Press
N
to start playback.
3
Adjust the volume.
Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
receiver.
To disconnect the Bluetooth device
Select “Connect/Disconnect” in step 4 in
“Pairing the receiver with a Bluetooth
device” (page 78).
To delete a paired Bluetooth device
from the device list
Initialize the receiver (page 90).
Using the button on the
receiver
1
Press BLUETOOTH to select
Bluetooth function.
The receiver automatically connects to
the last connected Bluetooth device.
If you cannot connect with a last
connected Bluetooth device, press
BLUETOOTH on the receiver.
Once the connection is established,
proceed to step 3.
2
Establish a connection from the
Bluetooth device.
For details, refer to the operating
instructions of your Bluetooth device.
Once the connection is established, the device
name appears on the TV screen and “BT”
lights up on the display panel.
3
Start playback from the Bluetooth
device.
You can also press N on the remote
control.
4
Adjust the volume.
Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
receiver.
To disconnect the Bluetooth device
Press BLUETOOTH on the receiver. You
can also disconnect from a Bluetooth
device. For details, refer to the operating
instructions of your Bluetooth device.
• Depending on the type of Bluetooth device, you
can adjust the volume using the controls of the
Bluetooth device.
• While connected to a Bluetooth device, this
receiver cannot be detected and a connection
cannot be established from another Bluetooth
device.
• If you cannot connect with a paired Bluetooth
device, perform the pairing operation between
the receiver and the Bluetooth device again.
• If the input has been set to “BLUETOOTH”
when you turn on the receiver, the receiver
automatically connects to the last connected
Bluetooth device.
Connecting to a
Bluetooth device from
this receiver
Note
Notes