Sony PCV-J200 - Manual (Page 24)

VAIO® System Reference Manual 12
i.LINK® (IEEE1394) Connector
The 6-pin i.LINK connector on the back of the system can supply power
from the computer to a device if the device also has a 6-pin i.LINK
connector. The 6-pin connector supplies 10 V to 12 V and a maximum
power of 6 watts.
Ethernet Connector
The Ethernet connector is a standard RJ-45 modular jack that connects to
a 10 Base-T/100 Base-TX Ethernet LAN connection.
✍
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394
connection. The i.LINK connection may vary, depending on the software applications,
operating system and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other.
✍
Refer to the documentation that came with your compatible i.LINK device for information on
operating conditions and proper connections. Before connecting compatible i.LINK PC
peripherals to your system, such as an optical disc drive or hard disk drive, confirm their
operating system compatibility and required operating conditions.
!
This connector is for LAN use only. Do not plug a phone cord into this connector.
6-pin i.LINK
IEEE1394
On back of
system
Ethernet
On back of
system