Sony PCV-J200 - Manual (Page 39)

Removing, Installing, and Replacing Components 27
Removing an Add-in Card
1 Remove the side panel (see “Removing the Side Panel” on page 22).
2 Disconnect any cables attached to the add-in card you want to
remove.
3
Remove the screw that secures the add-in card to the chassis, and set
it aside for future use.
4
Remove the add-in card from the PCI slot connector, and store the
card in an anti-static wrapper for future use.
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut down
the computer, and unplug the power cord.
✍
Grasp the card with one hand on each end, and gently pull up as you rock the card
from side to side.