Sony PCV-J200 - Manual (Page 40)

VAIO® System Reference Manual 28
5
If you do not replace the card or install another add-in card, install a
slot cover over the vacant slot at the rear of the chassis (see
“Covering
an Open I/O Slot” on page 40).
6
Replace the side panel (see “Replacing the Side Panel” on page 25).
!
Hold the add-in card by its edges, and do not touch any components or
connector contacts on the card. Static electricity in your body may
damage sensitive components on the card. As a precaution, touch any
exposed metal part on the metal chassis (preferably the metal part on
the power supply) before handling an add-in card to discharge any static
electricity in your body.