Sony SDM-E76D - Manual (Page 32)

8
(GB)
Adjusting the tilt
This display can be adjusted within the angles shown below.
Grasp the lower sides of the LCD panel, then adjust screen tilt.
To use the display comfortably
This display is designed so that you can set it up at a comfortable
viewing angle. Adjust the viewing angle of your display
according to the height of the desk and chair, and so that light is
not reflected from the screen to your eyes.
Note
When adjusting the screen tilt, make sure not to knock or drop the display
off the desk.
Selecting the input signal
(INPUT button) (SDM-E76D/SDM-E96D only)
Press the INPUT button.
The input signal change each time you press this button.
Approx. 5° – 25°
On-screen message
(Appears about 5 seconds on
the upper left corner.) Input signal configuration
INPUT1 : DVI-D DVI-D input connector
(digital RGB) for INPUT1
INPUT2 : HD15 HD15 input connector
(analog RGB) for INPUT2
OK / INPUT