Sony DCR-HC20 - Manual (Page 46)

Customizing Your Camcorder 46
FLASH LVL
Note that these settings will not function with external flashes that do not support
the following settings.
b Note
• The setting returns to [NORMAL] when you disconnect the power source from your
camcorder for more than 5 minutes.
AUTO SHTR
HIGH To make the flash (optional) level higher than normal.
G NORMAL To use the normal setting.
LOW To make the flash (optional) level lower than normal.
G ON Select to automatically activate the electronic shutter to adjust the
shutter speed when recording in bright conditions.
OFF Select when recording without using the electronic shutter.