Int.rec – Sony DCR-HC20 User Manual
Page 56
Customizing Your Camcorder
56
b
Notes
• When you use frame recording continuously, the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
INT.REC
You can record pictures on the tape at a selected interval.
You can achieve excellent recordings of flowers blooming, etc. with this function.
Connect your camcorder to the wall outlet using the supplied AC Adaptor during
the operation.
1
Select [SET], then touch [EXEC].
2
Select [INTERVAL], then touch [EXEC].
3
Select a desired interval time (30 seconds, 1, 5, 10 minutes), then touch
[EXEC].
4
Select [REC TIME], then touch [EXEC].
5
Select a desired recording time (0.5, 1, 1.5, 2 seconds), then touch
[EXEC].
6
Touch [
RET.].
7
Select [ON], then touch [EXEC].
8
Touch .
flashes.
9
Press REC START/STOP.
Interval recording starts.
lights up on the screen during Interval recording.
To cancel Interval recording, set to [OFF], then touch [EXEC] in the menu
settings.
b
Note
• There may be a discrepancy in recording time of up to ± 6 frames from the selected time.
ON (
)
Select to record pictures using frame recording.
1
Select [ON], then touch [EXEC].
2
Touch .
3
Press REC START/STOP.
A picture (approximately 6 frames) is recorded, and your
camcorder enters the standby mode.
4
Move the subject and repeat step 3.
[b]
[b]
[a]
[a]
b. [INTERVAL]
a. [REC TIME]