Play an md – Sony MZ-S1 User Manual

Page 25

Advertising
background image

25

-GB

2

Play an MD.

1

Press N.
A short beep sounds in the headphones/
earphones.

2

Press VOL +/– to adjust the volume.
The volume will be shown in the
display.

To stop play, press x.

A long beep sounds in the headphones/
earphones.
After you press x on the recorder to stop, the
recorder will automatically turn off in about 10
seconds (when using the dry battery) or about 3
minutes (when using the AC power adaptor).
Playback starts from the point you last stopped
playing. To start playback from the beginning
of the first track, press and hold N for 2
seconds or more on the recorder.

If the play does not start

Make sure the recorder is not locked (page 16,
49).

Suppressing the skips of the sound
(G-PROTECTION)

The G-PROTECTION function was developed
to provide a higher level of shock resistance
than that of existing players.

Note

The playback sound may skip if:
the recorder receives stronger continuous

shock.

a dirty or scratched MiniDisc is played.

z

The playback mode will switch automatically

(stereo, LP2 stereo, LP4 stereo, or monaural).

To play only the tracks in a certain group, see

“Using the group function (Group Mode)”
(page 35).

Control key
(VOL +/–/
N

/x)

To

Press

Find the beginning of the current track or
a previous track

1)

..
Press . repeatedly until the beginning of
the desired track.

Find the beginning of the next track

2)

> once.

Go backwards while playing

Press and hold ..

Go forward while playing

Press and hold > .

Pause

X.
Press X again to resume play.

Remove the MD

x, and open the lid.

3)

1)

If you press . twice continuously while playing the first track of the disc, the recorder goes to the
beginning of the last track on the disc.

2)

If you press > during the last track of the disc, the recorder goes to the beginning of the first track
on the disc.

3)

Once you open the lid, the point to start play will change to the beginning of the first track.

Advertising