Sony MZ-S1 - Manual (Page 28)

28
-GB
Long-time recording
(MDLP)
Select each recording mode according to
the recording time that you want.
Stereo recording is possible at 2 times
(LP2) or 4 times (LP4) the normal
(stereo) recording time. Monaural
recording at 2 times normal recording
time is also possible.
MDs recorded in monaural, LP2, or
LP4 mode can be played back only
on MD players or recorders with
monaural, LP2, or LP4 playback
mode.
1
While the recorder is stopped, press
MENU.
2
Press . or > repeatedly until
“R-MODE” flashes in the display,
and then press ENTER.
3
Press . or > repeatedly to
select the desired recording mode,
and then press ENTER.
Each time you press . or >, the
display changes as follows:
4
Press N while pressing REC.
5
Play the sound source.
To stop recording, press x.
The recorder remains at the previous
setting of the recording mode when you
record the next time.
When you do not want “LP:”
added automatically at the
beginning of a track
When “LP:” is added to the beginning of a
track, “LP:” is displayed whenever an
attempt is made to play or edit the disc on
a unit that does not support MDLP mode.
This display lets you know that playback
or editing of the track is not possible on
the machine being used. The recorder is
factory set to add “LP:” at the start of
each track.
1
While the recorder is stopped, press
MENU.
2
Press . or > repeatedly until
“OPTION” flashes in the display, and
then press ENTER.
3
Press . or > repeatedly until
“LPStmp” flashes in the display, and
then press ENTER.
Recording
mode
1)
Display Recording
time
3)
SP stereo SP Approx. 80
min.
LP2 stereo LP2 Approx. 160
min.
REC
MENU/ENTER
Control key
(VOL +/–
.
/>/N)
LP4 stereo LP4 Approx. 320
min.
Monaural 2) MONO Approx. 160
min.
1) For better sound quality, record in normal
stereo (SP
) or LP2 stereo mode.
2) If you record a stereo source in monaural, the
sound from left and right will be mixed.
3) When using an 80-minute recordable MD
Recording
mode
1)
Display Recording
time
3)