Sony DCR-TRV240 User Manual
Page 104
104
Viewing images recorded on a tape on your computer
(Windows users only)
Notes
•When you view images on your computer with the USB connection, the following
may occur. This is not a malfunction:
– The image may fluctuate
– The image may contain noise, etc.
– The image does not appear properly if the TV color system used for the image signal
differs to the system used on your camcorder.
•When your camcorder is in the standby mode with a cassette inserted, it turns off
automatically after three minutes.
•We recommend setting DEMO MODE to OFF in the menu settings when your
camcorder is in the standby mode, and no cassette is inserted.
•Indicators in the camcorder LCD screen do not appear on images that are captured
into your computer.
If image data cannot be transferred by the USB connection
The USB driver has been registered incorrectly as your computer was connected to your
camcorder before installation of the USB driver was completed. Reinstall the USB driver
following the procedure on page 97.
If any trouble occurs
Close all running applications, then restart it.
Carry out the following operations after quitting the application:
– Disconnect the USB cable
– Change the POWER switch setting or set it to OFF (CHG)
Seeing the on-line help (operating instructions) of “PIXELA
ImageMixer Ver.1.0 for Sony”
“PIXELA ImageMixer Ver.1.0 for Sony” is provided with on-line help (operating
instructions).
(1)
Click
button located in the upper-right corner of the screen.
The “ImageMixer’s Manual” screen appears.
(2)
You can access the desired topics from the contents.
To close on-line help
Click
located in the upper-right corner of the “ImageMixer’s Manual” screen.
If you have any questions about “PIXELA ImageMixer Ver.1.0 for Sony”
“ImageMixer Ver.1.0 for Sony” is a trademark of PIXELA corporation. Refer to the
information web site at: “http://www.imagemixer.com”.
Notes on using your computer
Communications with your computer
Communications between your camcorder and your computer may not recover after
recovering from Suspend, Resume, or Sleep.