Sony DCR-TRV240 - Manual (Page 37)

37
Playback
–
Basics
To monitor high-speed pictures while advancing or rewinding
the tape (skip scan)
Keep pressing m while rewinding or M while advancing the tape. To resume
rewinding or advancing, release the button.
To view pictures at slow speed (slow playback)
Press y on the Remote Commander during playback. For slow playback in the reverse
direction, press
, then press y on the Remote Commander. To resume normal
playback, press N.
To view pictures at double speed
Press
×
2 on the Remote Commander during playback. For double speed playback in the
reverse direction, press , then press
×
2 on the Remote Commander. To resume
normal playback, press N.
To view pictures frame-by-frame
Press C on the Remote Commander in the playback pause mode. For frame-by-frame
playback in the reverse direction, press c. To resume normal playback, press N.
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mode. The last five seconds of the recorded section
plays back and stops.
In the various playback modes
•Noise may appear when your camcorder plays back tapes recorded in the Hi8/
standard 8 system.
•Sound is muted.
•The previous recording may appear as a mosaic image when playing back in the
Digital8 system.
Notes on the playback pause mode
•When the playback pause mode lasts for three minutes, your camcorder automatically
enters the stop mode. To resume playback, press N.
•The previous recording may appear.
Slow playback for tapes recorded in the Digital8 system
Slow playback can be performed smoothly on your camcorder; however, this function
does not work for an output signal through the DV IN/OUT jack.
When you play back a tape in reverse
Horizontal noise may appear at the center, or top and bottom of the screen. This is not a
malfunction.
Playing back a tape