Sony DCR-TRV240 - Manual (Page 139)

139
“
Memory Stick
”
operations
To stop copying
Press MENU.
When the “Memory Stick” becomes full
“MEMORY FULL” appears on the screen, and copying stops. Insert another “Memory
Stick” and repeat the procedure from step 2.
When the access lamp is lit or flashing
Do not shake or knock your camcorder. As well do not turn the power off, eject the
“Memory Stick” or remove the battery pack. Otherwise, image data may become
damaged.
If the write-protect tab on the “Memory Stick” is set to LOCK
“NOT READY” appears on the screen when you select PHOTO SAVE in the menu
settings.
When you change the “Memory Stick” during copying
Your camcorder resumes copying from the last image recorded on the previous
“Memory Stick”.
While copying still images from a tape
•The image is recorded in the FIELD mode automatically even you select FRAME in
the menu settings. (DCR-TRV340 only)
•The image size is automatically set to 640
×
480, even if you set IMAGESIZE to 1152
×
864 in the menu settings. (DCR-TRV740/TRV840 only)
Copying still images from a tape – PHOTO SAVE