Sony DCR-TRV240 - Manual (Page 41)

41
Advanced Recording Operations
Self-timer recording
– Except DCR-TRV240
You can record still images on tapes with the self-timer.
You can also use the Remote Commander for this operation.
Before operation
Set PHOTO REC to TAPE in the menu settings. (The default setting is MEMORY.)
(p. 105)
(1) In the standby mode, press MENU to display the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select SELFTIMER in , then press the
dial.
(3) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(4) Press MENU to make the menu settings disappear.
(5) Press PHOTO deeper.
The self-timer starts counting down from 10 with a beep sound. In the last two
seconds of the countdown, the beep gets faster, then recording starts
automatically.
To cancel self-timer recording
In the standby mode, set SELFTIMER to OFF in the menu settings.
You cannot cancel self-timer recording using the Remote Commander.
Note
The self-timer recording mode is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHG) or VCR.
Recording still images on a tape – Tape Photo recording
1,4
MENU
PHOTO
5
PHOTO
3
CAMERA SET
SELFTIMER
D ZOOM
PHOTO REC
16 : 9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
[MENU] : END
OFF
ON