Step 1 preparing the power supply – Sony DCR-TRV240 User Manual
Page 12
Advertising
12
Installing the battery pack
(1)
Lift up the viewfinder.
(2)
Slide the battery pack down until it clicks.
To remove the battery pack
(1)
Lift up the viewfinder.
(2)
Slide the battery pack out in the direction of the arrow while pressing BATT
(battery) release lever down.
If you install the large-capacity battery pack
If you install the NP-FM70/QM71/FM90/QM91/FM91 battery pack on your
camcorder, extend its viewfinder.
Step 1 Preparing the power supply
1
2
BATT (battery)
release lever
Advertising