Sony DCR-TRV240 - Manual (Page 164)

164
– Except DCR-TRV240
You can copy still images recorded on “Memory Stick”s and record them to tapes.
Before operation
• Insert a tape for recording into your camcorder.
• Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Using the video control buttons, search a point where you want to record the
desired still image. Set the tape to playback pause mode.
(3) Press z REC and the button on its right simultaneously on your camcorder.
The tape is set to the recording pause mode.
(4) Press MEMORY PLAY. The last recorded image is displayed.
(5) Press MEMORY+/– to select the desired image.
To see the previous image, press MEMORY–. To see the next image, press
MEMORY+.
(6) Press X to start recording and press X again to stop.
z
appears on the screen during recording.
(7) If you have more to copy, repeat steps 4 to 6.
To stop copying
Press x.
Copying images recorded on “Memory
Stick”s to tape
6 4
3
2
REC
PAUSE
5
PLAY