Alpine CVA-1004 - Manual (Page 16)

14
-EN
SOURCE/PWR
g g g g g f f f f f
2 8 8 8 8 8/FOLDER
: : : : :/J J J J J
1 9 9 9 9 9/FOLDER
CHG/R.SEL 5 ( ) 4 ( )
6 ( )
Playing Optional CD Player or
Changer
When an optional Alpine CD player or CD/MP3
changer is connected, you can control it from the
CVA-1004. This section describes operation
assuming that an Alpine CD player is connected.
(When a CD changer is connected, see page 16
to select your desired disc.)
You can directly select the CD Changer mode by
pressing CHG/R. SEL (changer) on the CVA-
1004.
1
Press SOURCE/PWR until the "CD" appears in
the display.
Insert a CD into the CD player, the player starts
playing.
2
Press g or f to select the desired
track(file).
Returning to the beginning of the current track(file) :
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track(file) :
Press f.
Fast forward :
Press and hold f.
3
To pause playback, press :/J.
Pressing :/J again will resume playback.
4
To eject the disc, press eject on the CD player.
Repeat Play
1
Press 5 ( ) to play back repeatedly the track
being played.
The track(file) will be played repeatedly.
Press 5 ( ) again and select OFF to
deactivate the repeat play.
NOTES
• If a CD Changer or an MP3 compatible CD changer
is connected and the REPEAT (RPT) ALL mode is
selected, the unit repeatedly plays back all tracks on
the disc selected.
Displayed in the monitor display:
Displayed in the sub-display:
• When you select “FOLDER” in the “Setting the
Range of MP3 File Selection” section on page 17 and
set to REPEAT (RPT) ALL, the files in the selected
folder will be repeatedly played back.
When the monitor is open: displayed in the monitor
• In case a 6-disc CD changer or an MP3 compatible CD
changer is connected:
In CD changer mode, press FUNC to light the "FUNC"
indicator in red and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press FUNC twice to light the "FUNC"
indicator in red and go to step 1.
When the monitor is closed: displayed in the sub-display
• In case a 6-disc CD changer or an MP3 compatible CD
changer is connected:
In CD changer mode, press FUNC to illuminate the
"FUNC" indicator and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press FUNC twice to illuminate the
"FUNC" indicator and go to step 1.
CD/MP3/Changer Operation (Optional)
Example of MP3 compatible CD changer mode Screen
Volume
Level Current Time
Selected Source
Song
Title
DISC number,
Folder number,
Track (file)
number
Artist Name
The current
setting status
Elapsed
playing
time
FUNC
MP3 indicator
→ REPEAT → REPEAT ALL → (off)
→ RPT → RPT ALL → (off)