Alpine CVA-1004 - Manual (Page 32)

30
-EN
Adjusting Color of Picture
Color adjustment can be made only to video
sources (DVD, Navigation system, etc). Color
adjustment cannot be made if a Navigation
system with the RGB feature is connected.
After carrying out steps 1 to 3 of "To display the
SETUP screen" (page 29), perform the operation
shown below.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2
Press preset 1 to activate the DISPLAY setting
mode. Press preset 1 again to select COLOR.
3
Press g or f to adjust the color between
MIN (-16) and MAX (+16) until you get your
desired color. When it reaches the minimum or
maximum point, the display shows “MIN” or
“MAX” respectively.
For any other settings, press preset 1 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.
NOTE
The Color setting for the video sources (AUX/DVD/NAV.)
will be individually memorized.
Adjusting Tint of Picture
Tint adjustment can be made only to video
sources (DVD, Navigation system, etc).
Tint adjustment cannot be made if a Navigation
system with the RGB feature is connected.
After carrying out steps 1 to 3 of "To display the
SETUP screen" (page 29), perform the operation
shown below.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2
Press preset 1 to activate the DISPLAY setting
mode. Press preset 1 again to select TINT.
3
Press g or f to adjust the Tint (between –
16 and +16). When it reaches the minimum or
maximum point, display shows "R MAX" or "G
MAX" respectively.
For any other settings, press preset 1 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.
NOTE
The TINT setting for the video sources (AUX/DVD/NAV.)
will be individually memorized.
Other Useful Features
g g g g g f f f f f
Preset 1
Preset 2
MUTE/SETUP