Alpine CVA-1004 - Manual (Page 37)

35
-EN
Other Useful Features
Switching the Tuner Mode
The CVA-1004 incorporates the MAX TUNE SQ
for the highest quality tuner audio. Moreover, you
can choose between three settings to suit your
personal preferences.
After carrying out steps 1 to 3 of “To display the
SETUP screen” (page 29), perform the operation
shown below.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2
Press preset 4 to activate the RADIO setting
mode. Press preset 4 again to select FM
CONDITION.
3
Press g or f to select the desired setting.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
For any other settings, press preset 4 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.
Turning Mute Mode On and Off
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-
801B) is connected to the CVA-1004, an Auxiliary
Source will be allowed to interrupt the current
audio source. For example, you can listen to a
portable MP3 player through your car audio
system even with a CD changer connected and
playing. The CD changer will automatically mute
when switched to the AUX Input. For further
details on how to use the Alpine KCA-801B, see
your authorized Alpine dealer.
After carrying out steps 1 to 3 of “To display the
SETUP screen” (page 29), perform the operation
shown below.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds.
2
Press preset 5 to activate the SYSTEM setting
mode. Press preset 5 again to select the IN-INT.
MUTE mode.
3
Press g or f to select OFF.
In the mute OFF mode:
The volume level can be adjusted in the
interrupt mode.
NOTE
When the mute ON mode is selected, sound will not
produce.
For any other settings, press preset 5 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.
NOTES
• Initial mode is "IN-INT. MUTE ON".
• The Auxiliary device being connected, must have an
Interrupt wire with a positive trigger, for this function
to operate automatically. Otherwise, a separate switch
needs to be added to switch manually.
Setting the External Expansion
Box
When using the optional expansion box (KCE-
104V), you can use this function.
After carrying out steps 1 to 3 of "To display the
SETUP screen" (page 29), perform the operation
shown below.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2
Press preset 5 to activate the SYSTEM setting
mode. Press preset 5 again to select EXPAND
BOX.
3
Press g or f to set KCE-104V/OFF.
KCE-104V: When connecting the expansion box
KCE-104V (not supplied).
OFF: When not connecting the expansion
box KCE-104V (not supplied).
(Make sure that KCE-104V is selected when the
KCE-104V is connected.)
For any other settings, press preset 5 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.
NOTE
The CVA-1004 is not compatible with the KCE-103V.