Alloy Computer Products POEGEM12T2SFP - Manual (Page 107)

POEGEM12T2SFP User Manual
103
Alloy Computer Products Pty Ltd Copyright ©2006
Link Down:
Tick the required trap method check box to enable a trap to be sent when a port
on the switch loses link.
Link Up:
Tick the required trap method check box to enable a trap to be sent when a port
on the switch establishes link.
Authentication Failure:
Tick the required trap method check box to enable a trap to be sent when
authorisation to the switches management fails.
User Login:
Tick the required trap method check box to enable a trap to be sent when a user
logs on to the switches management.
User Logout:
Tick the required trap method check box to enable a trap to be sent when a user
logs out of the switches management.
STP Topology Changed:
Tick the required trap method check box to enable a trap to be sent when the
STP Topology has changed.
STP Disabled:
Tick the required trap method check box to enable a trap to be sent when STP
has been disabled.
STP Enabled:
Tick the required trap method check box to enable a trap to be sent when STP
has been enabled.
LACP Disabled:
Tick the required trap method check box to enable a trap to be sent when LACP
has been disabled.
LACP Enabled:
Tick the required trap method check box to enable a trap to be sent when LACP
has been enabled.
LACP Member Added:
Tick the required trap method check box to enable a trap to be sent when a
LACP Member has been added.
LACP Port Failure:
Tick the required trap method check box to enable a trap to be sent when a
LACP Port has failed.
GVRP Disabled:
Tick the required trap method check box to enable a trap to be sent when GVRP
has been disabled.
GVRP Enabled: