Alloy Computer Products POEGEM12T2SFP - Manual (Page 44)

POEGEM12T2SFP User Manual
40
Alloy Computer Products Pty Ltd Copyright ©2006
TX 512 ~ 1023 Bytes:
Displays the total number of 512 ~ 1023 byte frames transmitted.
TX 1024 Bytes:
Displays the total number of 1024 byte frames transmitted.
RX CRC/Alignment:
Displays the total number of Alignment and CRC error packets received.
RX Undersize:
Displays the total number of short frames (<64 bytes) received with valid CRC.
RX Oversize:
Displays the total number of long frames (>1024 bytes) received with valid CRC.
RX Fragments:
Displays the total number of short frames (<64 bytes) received with invalid CRC.
RX Jabber:
Displays the total number of long frames (>1024 bytes) received with invalid
CRC.
RX Drops:
Displays the total number of frames dropped due to the receive buffer being full.
RX Errors:
Displays the total number of Error packets received.
TX Collisions:
Displays the total number of collisions transmitted.
TX Drops:
Displays the total number of transmitted frames dropped due to excessive
collisions, late collisions or frame aging.
TX FIFO Drops:
Displays the total number of frames dropped due to the transmit buffer being full.
Select:
Used to select what ports statistics are being displayed.
Refresh Interval:
The user can define the amount of time the switch will take to update the ports
statistics this is measured in seconds and ranges from 3 – 10.
Default: 3 seconds.
Reset:
The reset button is located at the top right hand side of the screen and is used to
reset the counters back to zero.