Alloy Computer Products POEGEM12T2SFP - Manual (Page 127)

POEGEM12T2SFP User Manual
123
Alloy Computer Products Pty Ltd Copyright ©2006
logout
Syntax:
logout
Description:
When you enter this command via a Telnet connection, you will be automatically logged out of the
system and disconnected. If you connect to the system via a direct serial port, you will be logged
out of the system and the login prompt will be displayed.
Argument:
None.
Possible value:
None.
Example:
None.
save start
Syntax:
save start
Description:
To save the current configuration as the startup configuration.
When you enter this command, the CLI will save your current configuration into the non-volatile
FLASH as the start up configuration.
Argument:
None.
Possible value:
None.
Example:
POEGEM12T2SFP# save start
Saving start...
Save Successfully
POEGEM12T2SFP#