Alloy Computer Products POEGEM12T2SFP - Manual (Page 25)

POEGEM12T2SFP User Manual
21
Alloy Computer Products Pty Ltd Copyright ©2006
3-1-2. IP Configuration
The IP configuration is used to set the IP settings in the switch. The POEGEM12T2SFP supports
either a static IP address allocated via the system administrator or can be assigned an IP
address dynamically from a DHCP server on your network. The IP address is used to gain
access to the management functionality of the switch.
Fig. 3-6
Function Name:
IP Configuration
Function Description:
Is used to set the IP Address, Subnet Mask, Default Gateway and DNS settings for the
switch
Parameter Description:
DHCP Setting:
The POEGEM12T2SFP supports DHCP (Dynamic Host Configuration Protocol)
Client which is used to receive an IP Address from a DHCP Server running on
your network. By Default the DHCP Client is disabled and a Static IP Address
has been allocated to the POEGEM12T2SFP. If Enabled the switch will receive
an IP Address from an existing DHCP Server on your network. If Disabled you
will need to allocate an IP Address in the spaces provided.
Click the <apply> button to update.
Default: Disabled
IP Address:
If the DHCP settings are set to Disabled you will need to set a manual IP
Address for the switch.
Enter the required IP Address in the space provided.
Click the <apply> button to update.
Default: 192.168.1.1