Alloy Computer Products POEGEM12T2SFP - Manual (Page 232)

POEGEM12T2SFP User Manual
228
Alloy Computer Products Pty Ltd Copyright ©2006
Backpressure flow control for half duplex
ƒ Cable and Maximum Length:
TP Cat. 5 UTP cable, up to 100m
1000Base-SX
Up to 220/275/500/550m,
depending on Multi-Mode Fibre type
1000Base-LX Single-Mode Fibre, up to10/30/50Km
1000Base-LX WDM (BiDi) Single-Mode Single Fibre, up to 20Km
ƒ Diagnostic LED:
System LED: Power, CPU
Per Port LED:
10/100/1000M Copper Port 1 to 12 LINK/ACT, 10/100/1000Mbps
PoE-PSE ACT, PoE FAIL
1000M SFP Fibre Port 11,12 SFP(LINK/ACT)
ƒ Power Requirement : AC Line
Voltage 100
∼240 V
Frequency 50
∼60 Hz
Consumption - Max. 15W ( in case no PD device
connected)
- Max. 135W ( with 8 x 15.4W PoE device
connected )
- Max. 185W ( with 12 x 15.4W PoE device
connected )
Ambient
Temperature 0
° to 50°C
Humidity 5% to 90%
Dimensions 44(H)
× 442(W) × 209(D) mm
Comply with FCC Part 15 Class A & CE Mark Approval, C-Tick
Note: Any specification is subject to change without notice.