Airlink101 AIC1620W User Manual
Page 12
Advertising
- 11 -
Step 5
Open SkyIPCam Utility by double clicking on its icon on your desktop.
or clicking
Start, then go to (All) Programs > Airlink101 SkyIPCam UltraView > SkyIPCam
Utility.
Step 6
Click on Search to find the camera on your network. Select the Camera you wish to configure and
click on
Link.
Note
If the Camera you wish to configure does not show up in the utility, make sure the camera is
properly connected to the same local network as your computer is, and the Green LED should be on.
Click on
Search to try again.
Advertising