Airlink101 AIC1620W User Manual
Page 51
- 50 -
Window
camera. Click
Preview to view the image; click
Disconnect to stop previewing.
TIP
You cannot set the motion detection area while adding the new camera. To set the motion
detection area of the camera, select the desired camera and click the Modify button on the
Device Setting window. See the following section for more information.
6. Close the Device Setting window and return to the Main window. The image of the camera will be
displayed.
TIP
When you add the camera and return to the Main window, the camera image will be displayed in
full-screen mode by default. Press the ESC key on the PC keyboard to resume the Main window.
NOTE
Divx/Xvid codec is required for viewing the image of camera. If the image cannot be displayed in
the Live View/Preview window normally, click the following path to download and install the
required component:
http://download.divx.com/divx/DivXInstaller.exe
Close