Airlink101 AIC1620W - Manual (Page 38)

- 37 -
Event Configuration >> Schedule Profile
This sub-menu displays the scheduled profile(s). To configure a new profile, click Add and then enter a
descriptive name for the profile in the prompt dialog window. After entering the profile name, click OK and
the profile is added to the Schedule Profiles list. To delete the profile, select the profile in the list and click
Delete.
- Profile Name: Display the profile name that you select in the Schedule Profiles list.
- Weekdays: Select the weekday(s) that you want to separately assign in the schedule profile. The
weekday that has been assigned will be displayed with green color.
- Time List: Display the time period that you have assigned within the selected weekday. To assign
the same time period to every weekday, click
Copy this to all weekdays; click Delete this from all
weekdays to remove the selected time period from every weekday. Click Delete to remove the
selected time period.
- Start/End Time: Enter the start and end time and then click Add to assign a time period within in
the selected weekday.
Event Configuration >> Motion Detect Trigger
Motion Detect Trigger: Check the Enable option to enable the trigger function of the camera, so that
you can send captured images within the detecting area to the FTP server, email receiver, or the
Network Storage server. You have to configure the corresponding settings, such as FTP or Email
server under
Event Server to allow these events working properly. Please note that you have to
configure the related settings before enabling these features.
- Schedule Profile: Select a schedule profile from the pull-down list.
- Action: Set the Trigger Out function or the following options: Record to Network Storage
(video clips without audio),
Send Email (captured images), or FTP Upload (captured images).