Airlink101 AIC1620W - Manual (Page 33)

- 32 -
4.4 Event Server
The Event Server menu contains three sub-menus that allow you to upload images to FTP, send emails
that include still images, and store video clips, still images to a network attached storage (NAS).
Event Server Setting>> FTP
FTP
- Host Address: Enter the IP address of the target FTP server.
- Port Number: Enter the port number used for the FTP server.
- User Name: Enter the user name to login into the FTP server.
- Password: Enter the password to login into the FTP server.
- Directory Path: Enter the destination folder for uploading the images. For example, /Test/ .
- Passive Mode: Check the Enable box to enable passive mode. If you are having trouble, you can
enable/disable this mode.
- FTP Upload with: Select upload to FTP with One Snapshot image or a series image in Pre-
event/Post-event time when event triggered.
NOTE Due to the network environment, the camera may not upload number of images that you set.
When you complete the required settings for FTP, click Test to find out if the related configuration is
correct or not. Once the camera connects to the server successfully, click Apply.