Airlink101 AIC1620W - Manual (Page 4)

- 3 -
Rear View
GPIO and RS485
is used to connect the
external devices.
Reset Button will restart the
camera when it is pressed quickly;
when it is pressed and held for five
seconds, the camera will restore
the factory default settings.
DC Power Connector
connects the AC power
adapter, in order to supply
power to the camera.
Ethernet Cable Connector
connects the network cable,
which supports the NWay
protocol so that the camera
can detect the network speed
automatically.
Audio I/O Connectors:
Audio Out connects an
external active speaker.
Mic In connects an external
microphone.
Antenna
Connector