Airlink101 AIC1620W - Manual (Page 5)

- 4 -
1.3 Features and Benefits
Thank you for purchasing the SkyIPCam1620W Wireless N MPEG4 3GPP Network Camera, a
standalone system that can be connected directly to your network.
With MPEG4 image compression technology, you can record streaming video that utilizes high quality
images to your hard drive, enable motion detection and set up automated e-mail alerts for security. The
built-in microphone and audio ports provide you with the extensive 2-Way Audio function, allowing you to
“listen” and “talk” to the area monitored by the camera. The camera can be managed remotely, so that
you can use a web browser to access and control it from any desktop/notebook computer or mobile
phone over the Intranet or Internet.
The simple installation procedures and web-based interface allow you to integrate it into your wired or
wireless network easily. The camera features Wireless N technology which provides higher bandwidth
and faster transmission speed as well as great flexibility of installation. With comprehensive applications
supported, the camera is your best solution for demanding surveillance and remote monitoring
applications.
MPEG4/MJPEG Dual-codec Supported
The camera provides you with excellent images by the MPEG4/ MJPEG dual-codec selectable
technology, allowing you to adjust image size and quality, and bit rate according to the networking
environment.
Flexible 2-Way Audio Capability
The camera allows you to connect an external microphone to receive on-the-spot audio via the
Internet, allowing you to monitor the on-site voice. In addition, you can connect an external active
speaker to the camera to speak through the camera (supporting mono audio only).
Supports RTSP
The camera supports RTSP (Real Time Streaming Protocol), which is a technology that allows you
to view streaming media via the network. You can view the real-time video with the Quick Time
player or RealPlayer. To view the real-time streaming image on your computer, open the RTSP
supported player and enter the link:
rtsp://(IP address of the camera)/mpeg4 .
I/O Connectors and RS-485 Provided
The I/O connectors (IN/OUT) of the camera provide the physical interface to send and receive
digital signals to a variety of external alarm devices (such as motion detection, event triggering,
alarm notification, and a variety of external control functions). The pins TX+ & TX- of the I/O
connectors are used for RS-485 data transmission, which allow you to connect a special featured
device (such as an external camera stand with Pan/Tilt function), configure the settings and control
the device from the
GPIO Trigger window of Web Configuration.
Remote Control Supported
By using a standard Web browser or the complimentary UltraView software application, the
administrator can easily change the configuration of the camera via Intranet or Internet. In addition,
the camera can be upgraded remotely when a new firmware is available. The users are also
allowed to monitor the image and take snapshots via the network.
Multiple Profiles Supported
The camera supports multiple profiles simultaneously, so that you can separately set up different
image settings (such as image quality and frame rate) for the three video types of the camera:
MPEG4, MJPEG, and 3GPP.
Multiple Platforms Supported
The camera supports multiple network protocols, including TCP/IP, SMTP e-mail, HTTP, and other
Internet related protocols. Therefore, you can use the camera in a mixed operating system
environment, such as Windows 7 / Vista / XP.