American Standard TRACER CH532 - Manual (Page 4)

4 CG-SVU01B-E4
TRACER CH532 Presentation
Important note: This document
describes all the functions available
on TRACER CH532 with software
version 2.0 and explains how to
program it.
Certain parameters must only be
modified by qualified personnel.
Before changing any parameter,
always check that the change does
not affect the good and safe
operation of the equipment.
Operation must always stay in the
catalogued limits.
Built-in control terminal features:
An LCD display (1), 4 lines x 20
characters with back lighting
6 buttons (2) to (7)
Figure 1 - TRACER CH532 user interface
2.
Alarm button:
Used for displaying or manually
resetting the alarms. The red LED
lights up , when at least one alarm
has been detected.
3. Program button:
Allows the various operating
parameters to be set (safety
parameters, thresholds).
4.
Escape button:
Allows the return to default display
5. 6.
Downward and Upward
arrows
Allows management of currently
displayed screen and setting of
values of control parameters
Esc
Prg
7
Validation button
Allows to move from line to line in
the currently displayed screen and to
confirm the set data.
Prg Esc
1 2 3 4
5 6 7