Alpine IVA-D105 - Manual (Page 43)

41
-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
Visual EQ Setting Operation
1
After steps 1 and 2 in “Display Setup Operation”
(page 39) have been performed, touch [
] of
VISUAL EQ.
VISUAL EQ screen appears.
2
Select a desired setting item by touching [ ] or [ ].
Setting items:
VISUAL EQ* BRIGHT COLOR* TINT* CONTRAST
SHARP* USER PRESET*
* The setting is available in the visual source mode. (except navigation
screen)
3
Change the setting on the selected item by touching
its [
] or [ ].
4
Touch [RETURN] to return to the previous screen.
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
Setting item: BRIGHT
Setting content: -15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car's interior lighting as
long as AUTO is set in “Setting the Brightness of the Backlighting”
(page 39).
Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
• Color adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.
• Color adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Setting item: TINT
Setting content: G15 ~ R15
Adjust the color from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each color.
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
• When the picture from the external input is set to PAL, you cannot
adjust the TINT.
Setting item: CONTRAST
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. “HIGH”
and “LOW” appear as the maximum and minimum values
specified.
• When any NIGHT M. to CONTRAST setting item is selected, image
contrast is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 39).
VISUAL EQ™
The following steps 1 to 4 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details
Selecting the VISUAL EQ Mode (Maker’s
setting)
OFF (FLAT): Initial Setting
NIGHT M.: Suitable for movies in which dark scenes
frequently appear.
SOFT: Suitable for CGs and animated films.
SHARP: Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1: Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 42).
P-2: Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 42).
Adjusting Brightness
Adjusting Color of Picture
Adjusting Tint of Picture
Adjusting Image Contrast
+01GB00IVAD105.book Page 41 Monday, January 15, 2007 4:02 AM