Alpine IVA-D105 - Manual (Page 45)

43
-EN
+01GB06IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
The unit includes a function to create better sound in a car enviroment.
The BassEngine menu lets you select standard adjustments as well as
5.1 surround sound settings. If the unit is connected to an optional
external processor, the adjustment will be made by A.PROCESSOR.
Adjustment can only be made after you have brought your vehicle to a
complete stop in a safe location.
BassEngine Operation
: the following settings can be made for standard
BassEngine on the unit.
• The settings can be made by the BassEngine only when in multi-
channel playback. However, the front/rear HPF setting for the X-
OVER adjustment can be made even when not in multi-channel
playback.
1
Check the Defeat mode is off (page 27), and then
touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [ ] of AUDIO.
The AUDIO setup screen appears.
3
Touch [ ] of BassEngine.
The BassEngine list screen appears.
4
Touch [ ] etc., of the desired item to change its
setting.
Setting items :
X-OVER / T.CORR / DOLBY PLII /REAR FILL /
SPEAKER SELECT / MULTH CH SETUP / SPEAKER SETUP /
BASS SOUND CONT. / USER PRESET
5
Touch [RETURN] to return to the previous screen.
External Audio Processor (Optional)
When an external audio processor is connected to this unit, you can
operate it from this unit. Some audio processors may not be operated.
In this case, operate them in the connected product. Explanations below
is the case when PXA-H700 or PXA-H701 is connected for example.
Refer also to the operating instructions of the connected audio
processor.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the MRA-
D550 is connected. Additionally, if the MRA-F350 is connected, the
following setting “Setting the MX mode” is not available. Also, the
setting content differs between the PXA-H700 and PXA-H701.
• This unit cannot be connected to the PXA-H510 and PXA-H900.
Adjusting Sound
To display the BassEngine or Audio processor mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the BassEngine or Audio processor
mode operation has been released. Engaging the parking brake
can reactivate the BassEngine or Audio processor mode, as long
as the car’s ignition has not been turned off. It is not necessary to
repeat the above procedure (1 through 3), of “To display the
BassEngine or Audio processor mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the BassEngine or Audio processor mode screen.”
BassEngine Operation
Following Steps 1 to 5 describe the common procedures for
operating the BassEngine setting function. For details of the
setting function items, refer to descriptions of respective items.
External Audio Processor
Operation
+01GB00IVAD105.book Page 43 Monday, January 15, 2007 4:02 AM