Alpine IVA-D105 - Manual (Page 77)

75
-EN
+01GB07IVAD105.fm
ALPINE IVA-D105 68-08564Z59-A (EN)
< JAPANESE CAR >
To install using the vehicle’s standard bracket.
• Make sure to use the supplied flush head screw (M4
× 3) to install
the monitor.
If you use another screw to install the monitor, it may cause a
malfunction. However, only if you cannot install with the flush head
screws (M4
× 3), use the supplied screw (M4 × 6).
Ground Lead
IVA-D105
Flush Head Screws (M4 × 3)
(Included)
Mounting Bracket
IVA-D105
Parking brake switch
(Yellow/Black)
Foot brake lamp
Foot brake switch
Battery
Chassis
Foot brake lead
Parking brake lamp
Parking brake lead
Pinch
Connector
(sold separately)
Pinch
Connector
(sold separately) (Yellow/Blue)
PARKING BRAKE
FOOT BRAKE
Foot Brake Lead / Parking Brake Lead Connection
IVA-D105
(Red)
(Yellow)
SPST SW (Optional)
FUSE (5A)
(Optional)
FUSE (20A)
(Optional)
Battery
IGNITION
BATTERY
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
• The diagram and the fuse amperage shown above are in the case when IVA-D105 is used individually.
• If the switched power (ignition) lead of the IVA-D105 is connected directly to the positive (+) post of the vehicle’s battery, the IVA-D105 draws
some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged.
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
+01GB00IVAD105.book Page 75 Monday, January 15, 2007 4:02 AM