Panasonic BL-MS103A User Manual
Page 27
2
Connecting Cameras
[For assistance, please call: 1-800-272-7033]
27
Note
•
If a user name and password has already been established for a camera,
Quick Setup will be unable to replace that data with the user name and
password for the BL-WV10A.
To register the camera as a local camera, reset the camera by pressing its
FACTORY DEFAULT RESET button before connecting it.
•
Quick Setup can take place within 20 minutes after the camera is turned
on. If the camera is not recognized, or if [Restarting camera] is displayed
at the bottom of the screen for more than 2 minutes without camera
registration beginning, reset the camera by pressing its FACTORY
DEFAULT RESET button and reconnect the camera.
•
If a camera needs to be restarted during Quick Setup, camera
configuration and restart will take about 2 minutes.
•
During Quick Setup, the wireless indicator will light in green.
•
Once registration is complete, the buzzer will sound and the wireless
indicator will flash green.
3.
To register an additional camera, connect the Ethernet cable to the new
camera and turn the camera on.
•
When registration is complete, the buzzer will sound and the wireless
indicator will flash once for each of the cameras registered.
When camera
registration is
complete,
[Finished] is
displayed.