Panasonic BL-MS103A - Manual (Page 48)

2 Connecting Cameras
48
1. Connect the cameras using the Ethernet cables provided with them to any of
the LAN jacks on the on the BL-WV10A.
2. Turn on the cameras.
• Quick Setup will begin for the camera.
Note
• During camera registration, the camera may be restarted, and registration
may take longer as a result. A camera restart can take up to 2 minutes.
• During Quick Setup, the wireless indicator will be green.
Ethernet cable
LAN jacks
Rear of camera
Rear panel of
BL-WV10A
Switch
Bottom of BL-C30A
To configure a BL-
C30A wireless camera
using the Quick Setup
utility, set the switch on
the bottom of the
camera to [WIRED]
Ethernet cable
Router