When using a computer and/or a router – Panasonic BL-MS103A User Manual
Page 55
3
Viewing Camera Images
[For assistance, please call: 1-800-272-7033]
55
•
If you changing the mode switch to [SEQ. DISP.] and turn the power off
and back on, the camera will cycle through all registered cameras
sequentially and display their images briefly.
[When Using a Computer and/or a Router]
•
If remote cameras are registered in camera list 1 and those cameras are set to
not save passwords (see page 115), the BL-WV10A will display a password
input screen upon launch. After entering the camera’s user name and
password and pressing [OK], the Monitoring Screen will appear.
[
•
Cameras for which Quick Setup was performed without setting the
administrator name and password will have user names and passwords set
automatically; their images cannot be monitored on a computer. Change the
camera’s user name (see page 134).