Panasonic BL-MS103A - Manual (Page 36)

2 Connecting Cameras
36
1. Connect the cameras using the Ethernet cables provided with them to any of
the LAN jacks on the BL-WV10A or BB-HGW700A.
• Connect the cameras while the BB-HGW700A is connected to the BL-
WV10A.
2. Turn on the cameras.
• Quick Setup will register each camera.
Note
• If a camera needs to be restarted during Quick Setup, camera
configuration and restart will take about 2 minutes.
• During Quick Setup, the wireless indicator will be green.
Ethernet cable
LAN jacks
Rear of camera
Rear panel of
BL-WV10A
Switch
Bottom of BL-C30A
To configure a BL-
C30A wireless camera
using the Quick Setup
utility, set the switch on
the bottom of the
camera to [WIRED]
Ethernet cable
Rear panel of BB-HGW700A