Panasonic BL-MS103A - Manual (Page 45)

2 Connecting Cameras
[For assistance, please call: 1-800-272-7033] 45
3. Enter the IP address for the camera and press [ENTER].
• Use an address with the same DHCP address segment as used by the
router, but make sure that address is not assigned in DHCP.
• The address entered here will be assigned to the first camera configured
using Quick Setup. Additional cameras will be assigned sequential
addresses.
• If you’re uncertain which addresses to use, ask the router’s manufacturer
how to confirm router settings and address usage.
2.4.4 Setting the User Name and Password
Note
• If the cameras are set to their default settings, user names and passwords
will be automatically assigned without a need for you to set the
administrator name and password. Images from cameras for which the
user names and passwords are not equal to the administrator name and
password, however, will not be visible with a computer. To view camera
images on a computer, Quick Setup must be performed after setting the
administrator name and password for the camera.
• User names and passwords are case sensitive.
1. On the [Basic Setup] screen, select [Camera Settings], and press [ENTER].
• The [Camera Settings] screen will appear.