Avanti BD7000 - Manual (Page 11)

11
Figure 1
Figure 2
Beer Keg Installation Sketch
Installation of CO
2
Regulator
 Attach the CO
2
regulator to the cylinder by turning the regulator nut
onto cylinder valve, making sure washer is securely inserted into
connecting nut. Tighten snug using an adjustable wrench (not
supplied) and assure there are no leaks. (See Figure 1)
 Installation Of CO2 Air Line Hose To Regulator
 Attach the open end of the red hose to the hose barb connection on
the regulator. (See Figure 2)
 Secure hose by using one clamp provided.
 Use pliers/screwdriver to tighten clamp and assure no leaks.
