Panasonic NE2156 - Manual (Page 11)

- 9 -
English
How to Operate
NE-2156-2/NE-1656
E. PROGRAM LOCK
INSTRUCTION DIGITAL DISPLAY WINDOW PAD
1 Keep the door closed.
☛ Digital Display Window must be blank.
2 Press Prog pad until “PROG”, “P” and “L” appear. (more than five
seconds)
☛ “PROG”, “P” and “L” will appear.
PROG
In Program Lock mode:
• The oven is started by pressing the desired Number/Memory pad. There is no need to press Start pad.
• Opening the door cancels the remaining time on the program.
• The oven can not be programmed or run manually until the program lock is released.
◆ To Activate Program Lock:
INSTRUCTION DIGITAL DISPLAY WINDOW PAD
2 Press Prog pad.
☛ “PROG” will start to blink.
PROG
4 Press Double Quantity pad.
☛ The currently programmed magnification number will appear.
Note: 1.6 times is preset at factory.
x 2 PROG
5 Press Number/Memory pads “1” and “5”.
☛ The programmed magnification number will appear.
1 5
PROG
6 Press Prog pad.
☛ “PROG” will stop blinking.
This means that you have completed programming.
PROG
• Three seconds later, Digital Display Window will go blank.
Note:
• If you want to program your desired magnification number for treble quantity, repeat as above, using Treble
Quantity pad instead of Double Quantity pad.
3 Press Number/Memory pad “5”.
☛ The selected pad number will appear and currently programmed
information will be indicated. 5
PROG
1
Example: To program 1.5 times of heating time for double quantity into Number/Memory pad “5”
1 Keep the door closed.
☛ Digital Display Window must be blank.
D. PROGRAMMING DOUBLE OR TREBLE QUANTITY PAD
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 9-10)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!