Panasonic NE2156 - Manual (Page 9)

- 7 -
English
C. PROGRAMMING NUMBER/MEMORY PADS –– single stage heating ––
INSTRUCTION DIGITAL DISPLAY WINDOW PAD
2 Press Program pad.
☛ “PROG” will start to blink.
PROG
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 9-10)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad “5”
How to Operate
NE-2156-2/NE-1656
1 Keep the door closed.
☛ Digital Display Window must be blank.
B. PROGRAMMED HEATING
INSTRUCTION DIGITAL DISPLAY WINDOW PAD
2 Press the desired Number/Memory pad “3”.
☛ The currently programmed information will be indicated.
3
PROG
1
3 Press Start pad.
☛ The oven lamp will turn on and heating will start. The heating time will
count down.
PROG
1
◆ In Program Unlock Mode:
• When all time expires, beep tone will sound and heating will stop. The oven lamp will
turn off. “0” will blink until the door is opened. One minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on.
• Close the door. The oven lamp will turn off. One minute later, Digital Display Window will
go blank.
◆ In Program Lock Mode:
Just press the desired Number/Memory pad. Heating will automatically start without pressing Start pad.
✐ For Double (or Treble) Quantity heating:
Press Double (or Treble) Quantity pad before pressing the desired Number/Memory pad.
Example: To select Number/Memory pad “3” at A side in which your desired heating program (at HIGH
power for 3 min., single stage heating) is set
1 Open the door and put the food in the oven.
☛ The oven lamp will turn on and “0” will appear.
Note: While “0” appears, operation is available. One minute after the door
is closed, “0” will disappear.
Note:
• When you want to select the number at B side, press Shift (A/B) pad before pressing the desired
Number/Memory pad.