Panasonic FS-100 - Manual (Page 26)

Quickstart
FS-100 Portable DTE Recorder
8
Record
Press this button once when the FS-100 is in
Stop
mode to put
the FS-100 into
REC-PAUSE
. Press it again to start recording.
Pressing the Record button while recording, causes the
current clip to close and a new clip is created without
dropping any frames. This button is the only button that has a
red legend on the front panel.
Back Search WW
Press this button to play video at speeds different than real-
time. Refer to the note in the Forward Search section.
Play X
Press this button to start playback of the selected clip.
Forward Search XX
Press this button to play video at speeds different than real-
time.
Fast Forward and Reverse
Pressing the Forward Search button multiple times results in increases in
the search speed, i.e. fast forward. This mode works both in forward and
reverse functions. For instance, if you are in 10X FF speed and you press
the Back Search button once, the FS-100 is now in 2X FF mode. In
addition, this applies to backward search speeds. The default speed
resolution is as follows (NTSC and PAL, have slightly different multiples for
< 1X):
• Reverse: -30X, -10X, -2X, -1X (reverse play), -1/2X(-15fps), Still.
• Forward: Still, +1/2X (+15fps), +1X (play), +2X, +10X, +30X
Fast Forward and Reverse Search Compatible Camcorders
In Forward and Reverse Search modes, some camcorders do not display
video when played-back from an external device, such as the FS-100.