Panasonic FS-100 - Manual (Page 73)

FS-100 Functions
FS-100 Portable DTE Recorder
55
Setting Up Master and Slave FS-100
1.
Connect the camcorder to the master FS-100,
DV I/O
connector using the supplied FireWire cable.
2. Master
Power on unit.
Go to the
HDD Mode
menu screen and enable
USE EXT FS-100
.
3.
Connect the FS-100s through the units
Computer I/O
connectors using a 6-pin to 6-pin FireWire cable.
4. Slave
Power on the unit
Go to the
HDD Mode
screen and enable
DD DRIVE
.
5. Master
Begin recording or playback using the master FS-100.
Use DD Drive Mode when Connecting to a PC
It is important to take the master FS-100 out of USE EXT FS-100
mode before attempting to connect to a computer.
To do this, select DD DRIVE from the HDD Mode screen.
This returns use of the unit to hard disk mode.
STOP 1 - 001
COUNTER
00 : 00 : 00 : 00
CONNECT
COMPUTER THEN
ENABLE BYPASS
4
3
2
1
Master FS-100 Slave FS-100