Panasonic FS-100 - Manual (Page 43)

Quickstart
FS-100 Portable DTE Recorder
25
Connecting a FS-100 to a DV/HD Camcorder
Before performing this procedure, make sure you have installed and
charged the battery, see
Installing / Removing the Battery Pack
on page
22.
1.
Connect the supplied Firewire cable to the
DV I/O
connector on
the top of the FS-100.
2.
Locate the FireWire/DV/iLink (or similar) connector on your
video camera. It is located in different places depending upon
the brand of camera. If you are unclear of its location, consult
your video camera manual.
3.
Connect the other end of the FireWire, 1394, cable to your
video camera.
4.
Turn on the video camera.
5.
Turn on the FS-100.
FS-100 Supplied with 4-pin to 6-pin FireWire Cable
A 4-pin to 6-pin FireWire, 1394, cable is provided with the
FS-100.
HVX200 FireWire Connector
The FireWire connector on the HVX200 is located on the right side of the
camera, behind the tape transport. For more information, refer to the
HVX200 documentation.