Panasonic FS-100 - Manual (Page 47)

Quickstart
FS-100 Portable DTE Recorder
29
Select a DV File Format
The DV file formats displayed depend on the recorder mode
selected in the previous step, for example
DVCPRO/DV REC
results
in the following:
1.
Use the
Up
and
Down
navigation buttons to select the DV file
format that supports the preferred NLE system. A dash
mark to the left of a list item indicates that it is the current
selection. The default value is AVI Type 2.
2.
Press the center
Select
button on the navigation buttons.
3.
Press the
Left
button to return to the menu title.
4.
Press the
Right
button once and advance to the
SETUP
screen.
DV24p and PAL 25P Modes
24p modes are only for use with camcorder's that are capable of DV-
24p Advanced mode.
PAL 25P camcorders require no special 25P DV format
Check www.focusinfo.com for supported Applications
For a complete and up-to-date list of supported applications and their
associated formats, visit the website:
http://www.focusinfo.com
FS-100 Stores Multiple Recorder Mode/DV File Format Combinations
FS-100 stores a unique file format setting for each recorder mode in the HDD
MODE menu. This makes it possible to record different file types on a stream
by stream basis; as an example, for DVCPROHD REC mode the DV FORMAT
could be P2, while for DVCPRO/DV REC mode the DV FORMAT is AVI TYPE2.
DV FORMATS
RAW DV
-AVI TYPE1
AVI TYPE2
CANOPUS AVI