Panasonic MotionSD STUDIO 1.0E - Manual (Page 219)

Q&A
- 219 -
Writing to DVD-RAM disc is not successful
Writing to DVD-RAM disc is not
successful
A DVD-RAM disc is set, but no disc information is
presented.
• When using multiple DVD-RAM drives make sure to
select the correct drive in the VRWriter Drive
Selection section.
• Check that the disc recording video in the Video
Recording format is set.
The “Drive D: cannot write the data for the
following reasons.
- A disc has not been inserted in the drive.
- The drive is used by another application.
- The drive cannot be used.”
error message is displayed.
• If some other writing software that supports
DVD-RAM discs is installed in the PC, this software
may not be possible to access the DVD-RAM disc.
In a case like this, either close or delete the
application.
• If the DVD-RAM disc is left opened with Explorer,
VRWriter cannot writes onto the DVD-RAM disc. Exit
Explorer.
If access is attempted with other software, such
as Explore, to the DVD-RAM drive being used by
VRWriter, an error message, [F:\ is not
accessible. Access is denied.] is displayed. (In
case the DVD-RAM drive is F:.)
• The disk used by VRWriter is not allowed to be
accessed by other applications. This is a
specification of VRWriter.
• This message may appear when you change the
disc after starting VRWriter and the auto play
function is set on Widows XP.
Methods for solving common problems when writing files
to DVD-RAM discs.