Panasonic MotionSD STUDIO 1.0E User Manual
Page 30
- 30 -
Input mode
SD memory card input mode
Outputting SD Memory Card video to DVD-RAM
or DVD R/RW disc.
When connecting the SD Video Camera, the video files on
the SD memory card can be output all together to
DVD-RAM or DVD R/RW disc.
1.
Insert a card into the SD Video Camera.
• If the MotionSD STUDIO has already been activated,
first exit from it.
• For details on how to insert a memory card, please
read carefully the Operating Instructions for the SD
Video Camera and the card.
2.
Connect the SD Video Camera to the
computer and activate the SD Browser (
• For information regarding SD Video Camera and PC
connection refer to the Operating Instructions of the
SD Video Camera.
3.
Select the target disc for output.
[Create DVD R/RW]
Data is sent to DVDWriter and output to DVD R/RW
disc. (
• When more than 40 video files are sent, only the first
40 are read.
• Video files with a playback time of less than
3 seconds are not read and cannot be output to DVD
R/RW disc.
[Create DVD-RAM]
Data is sent to VRWriter and output to DVD-RAM disc.
(
• Video files with a playback time of less than
3 seconds cannot be output to DVD-RAM disc.
Note
` Only video files are sent to DVDWriter and VRWriter.
` If there are unnecessary video files, confirm which are
unnecessary by playing back the video thumbnails in SD
Browser and then set for the unnecessary files not to be
written in DVDWriter or VRWriter.
` It may take a few minutes to launch VRWriter.