Merrychef eikon e5 - Manual (Page 39)

Service & Parts Manual original Instructions
Part Number 32Z3814 US
Issue 1
39
SP
ARES &
REPL
A
CEMENT
6 7
8 9 10
5
3
2
4
1 PM (Personality Module) 19.3
replacement
The PM on the SRB contains the Firmware.
The PM on the BTS contains the Firmware,
Oven Serial Number, Temperature
Calibration, Cooking Programs, Application
Icons and the Recipe Images.
With a new PM fitted and casing refitted, switch 19.3.1
on the oven and tap the screen to hold and check the
BTS and SRB versions (1) are the latest release, if not,
execute a Firmware update using the latest versions.
For details see ‘Firmware Updates’ (Servicing section).
Tap the top right of the screen to bypass the 19.3.2
preheat stage (2).
Enter the service password and select OK to 19.3.3
display the Settings menu, see (3).
Select the USB symbol (4). 19.3.4
Slide the Merrychef badge upwards and insert 19.3.5
the USB Memory Stick into the slot (5).
Once the USB has stopped flashing, select the 19.3.6
required USB recipe symbol (6).
Select the Application Icons file to download (7). 19.3.7
Note; a tinted band over a file name indicates the file
is not valid for that oven.
Check the file information shown is correct 19.3.8
before selecting OK (8), if not, select ‘X’ and locate the
correct file.
When completed, select recipes to load the 19.3.9
cooking programs (9). Once the programs are loaded
the oven restarts.
Enter the Date & Time settings (10). For details 19.3.10
see under ‘Oven Control Settings’ (Product Information
section).
Turn the oven switch OFF/ON. 19.3.11
Remove the USB and keep in a safe place. 19.3.12
Reposition the USB cover.