Power Soak 33638 SILVERWARE WASHER OWNER'S MANUAL User Manual
Page 26
26
Your silverware pre-washing system requires minimal routine preventive
maintenance. The following procedures should be done on a routine basis
to ensure that your system remains reliable:
IMPORTANT: Turn off the power to the unit at the
main breaker prior to performing the following task!
Clean the pump motor fan shroud with a damp, soapy rag. The motor
shroud is the "vented" cover located on the bottom of the motor. This will
prevent grease and dust from accumulating in the cover's openings, which
can obstruct the airflow that cools the motor.
De-lime the wash tank. Simply add a de-liming agent and warm, fresh
water filled to the water line, and run the system overnight. Ask your
chemical sales representative to recommend a specific de-liming agent.
There are no other preventive maintenance procedures that you will need
to perform on your Power Soak Silverware Pre-washing System. You need
not be concerned about greasing the motor bearings as they are
permanently lubricated and sealed. If you have any questions regarding
the preventive maintenance procedures, please contact the factory at 800-
444-9624.