Power Soak 33638 SILVERWARE WASHER OWNER'S MANUAL - Manual (Page 9)

9
Requirements for Detergents
Detergents
Improper detergents may damage equipment! Use of the
correct detergent in your pre-wash system is critical to its
washing performance. If you are having problems with
cleaning results, please contact Power Soak Systems.
Sanitization
The Power Soak Silverware Pre-washing System is not
designed to sanitize the items it cleans. The intended
purpose of the pre-washer is to break down and soften the
soils on the silverware so that a single pass through a
commercial dish machine will finish the cleaning job and
sanitize the silverware. THE PRE-WASHER MUST NOT
BE USED ALONE TO CLEAN OR SANITIZE
SILVERWARE.
Factory Assistance
If your chemical sales representative is having difficulty
selecting a detergent, or if you are getting poor results with
the chemicals your representative has recommended,
please contact Power Soak Systems at 800-444-9624
The silverware pre-wash system wash
tank requires a low-foaming, metal-safe
detergent that is safe for the hands. The
detergent should have good grease
cutting abilities but not have an
excessively high pH level.